FAQ

StickerPlayer is a AI Graphic Printer which can turn child's voice into instant creative stickers. Safe, fun, and powered by AI — sparking imagination one print at a time.

Once the box is set up and you see the “Press to talk” screen, hold the button down to speak and tell StickerPlayer what you want to make. Then release the button.

Ages 5 and up. Ages 2–4 can enjoy with parent/older kid help. Great for all ages for crafts & journaling.

Yes. StickerPlayer understands multiple languages. Speak clearly in whichever one you prefer.

Push up on the door from top and drop in the paper roll with the printable side facing forward. Snap door closed with a bit of paper peeking out the top.

Make sure your WiFi is set up for 2.4GHz. Most routers will broadcast 2.4GHz and 5GHz. Try moving closer to your Wi-Fi router. Sometimes a weak signal can interfere with the setup process.

If the problem persists, email us at Market@aitoylab.com. We will get you set up asap!

Fast. Most stickers are ready in under few seconds from the moment your child finishes speaking. There's no warming up, no waiting to dry, and no smudging. Just an instant sticker ready to color and keep.

Most likely the paper is loaded backwards or it is not straight in the printer.
Door is fully closed.

Open the back door and reload the paper roll. Sometimes jams happen when the roll is nearly finished. If that’s the case, just pop in a new roll.

StickerPlayer paper is designed to tear cleanly.
After your sticker finishes printing, grasp the top left corner of the paper and quickly pull forward and down towards you. The paper will tear along the serrated plastic edge. Pulling quickly and at a slight angle helps get the cleanest cut. You may need to hold the StickerPlayer still with your other hand. The serrated edge does the work, so kids don’t need scissors!

Nope! No ink, no toner, no cartridges. StickerPlayer uses thermal printing technology, which means a small heated element reacts with specially coated paper to create crisp black-and-white artwork. It's completely mess-free, and the only thing you'll ever need to replace is the paper roll.

Thermal printing is a technology that uses gentle heat, not ink, to print images onto specially coated paper. It's the same method used in receipt printers and label makers, and it's been trusted for decades. With StickerPlayer, there's no ink exposure, no chemicals, and no hot surfaces kids can touch. Our paper is BPA and BPS-free, making it safe for little hands to hold, color, and stick anywhere.

That's by design! Thermal printers create crisp black-and-white images, and we love it that way. Black-and-white stickers are made to be colored in, which turns every print into a two-part creative experience: first your child imagines and speaks their idea, then they bring it to life with color. It keeps the creativity hands-on and screen-free from start to finish.

Thermal prints can fade if stored in heat, direct sunlight, or near chemicals for extended periods. This is true of all thermal paper products. To keep stickers looking their best, store unused rolls in a cool, dry place away from sunlight. Once colored in, the colored pencil layer helps protect the print.

Printing is black and white by design so kids can color their stickers.

Yes! All StickerPlayer paper rolls are BPA and BPS-free. Safe for kids, safe for the planet, and perfect for coloring, tearing, and sticking everywhere.

StickerPlayer was built from the ground up with kids’ safety at the center. That means every part of the experience, from what kids can say, to what gets printed, is filtered, protected, and age-appropriate.

Built-in filters: Our model includes strict safety filters that block inappropriate content before it ever appears, ensuring that every creation stays fun, imaginative, and age-appropriate.
No “always-on” listening: StickerPlayer only listens when kids press the button. It never runs in the background and it doesn't store voice data.
Designed with parents in mind: We built StickerPlayer to be a trusted creative tool that gives kids real creative independence. It’s not a passive screen, not a scrolling feed, and not a place where kids can wander into unknown content. You always know exactly what your child is interacting with and you can review their creations anytime through the app.

No. StickerPlayer only listens when the top button is pressed.

No. StickerPlayer does not store voice data for extended periods of time and does not share any personal information.

Yes, and that's exactly what it was built for. Once your child speaks their idea and the sticker prints, everything that follows is completely hands-on: coloring, cutting, decorating, storytelling, and sticking. It's creative play from start to finish, and a great alternative to tablets and TV for kids who need something to do with their hands.

It's one of the most unique creative gifts for kids right now, and one of the few gifts that keeps going. Unlike toys that lose their appeal after a few days, StickerPlayer grows with your child's imagination. Every day brings new ideas, new stickers, and new ways to play. It's been called a "screen-free creative companion" by parents.

You will need Wi-Fi or a hotspot connection to connect and generate new stickers. Once your StickerPlayer is connected, you can move it around your home as long as it stays in range.

Yes, it has a built-in battery, you can charge it fast by the Type-C charging cable in the package.